Company EK Water Blocks start complete water blocks EK-Supremacy EVO nozzle J3, optimizing their processors Intel Haswell-E by LGA-2011-3.
The design of the water block includes a base, mounting plate, sealing gasket, nozzle insert, consisting of two parts, and cover. The task of the nozzle is a plate with a hole and insert consists in the formation of turbulent flows in the water block. By default, the waterblock EK-Supremacy EVO set I1 and nozzle insert J1 (0,25 mm). According to the manufacturer, this combination is quite versatile. Those who want to squeeze the maximum performance may vary and insert the nozzle. The kit includes insertion I2, which increases the efficiency of heat removal when used in conjunction with the nozzle orifice J2 width of 0.3 mm (this combination is recommended for processors AMD) or J3 with the hole width of 0.1 mm (this combination is recommended for Intel in performance LGA-2011-3).
According to the manufacturer, the replacement of standard combinations by I2 and J3 allows you to lower the temperature of the processor for another 0,5-1,0 ° C compared with the default configuration.
The manufacturer took care of those who bought the EK-Supremacy EVO before. In 1000 sales channels directed nozzles J3, which will be available for free, paying only the cost (no more than two pieces in one order).
Source: EK Water Blocks