Mainboard Gigabyte Z97-HD3P equipped with interface SATA-Express and M.2 with a capacity of 10 Gbit / s

Mainboard Gigabyte Z97-HD3P equipped with interface SATA-Express and M.2 with a capacity of 10 Gbit / s

    792

    The range has expanded Gigabyte motherboard Z97-HD3P, designed for Intel processors performance of LGA 1150. It is easy to understand by description, its basis is the chipset Intel Z97 Express.

    Motherboard dimensions – 305 x 190 mm – with a large margin the width fit the standard size ATX (305 x 244 mm).

    Предположительно, плата Gigabyte Z97-HD3P будет стоить около $100

    The board uses a 24-pin ATX power connector and 8-pin EPS. The power subsystem processor – four-phase. CPU socket is connected with four slots for the DIMM. Supports memory up to DDR3-3100 (OC) a total volume of up to 32 GB of dual-channel configuration.

    The list includes the expansion slots on a single slot PCI-Express 3.0 x16 and PCI-Express 2.0 x16 (electrical – x4) and two slots PCI-Express 2.0 x1 and PCI. It should be clarified that the installation of the expansion card slot PCI-Express 2.0 x16 slots, making it impossible to use PCI-Express 2.0 x1, as they use a common line.

    Предположительно, плата Gigabyte Z97-HD3P будет стоить около $100

    The equipment of the board includes six SATA 6 Gb / s SATA-Express interfaces and M.2 with a capacity of 10 Gbit / s. Under SATA-Express and M.2 allocated two ports SATA, so that you can simultaneously use only these two ports or SATA-Express or M.2.

    Equipment also includes six USB 3.0 ports and eight ports USB 2.0, port Gigabit Ethernet, eight-channel audio codec Realtek ALC887. On the pin signals derived LPT ports and COM. There are video outputs D-Sub, DVI-D and HDMI 1.4a, which can simultaneously connect three monitors.

    We can assume that the board will cost around $ 100.

    Source: Gigabyte

    comments powered by Disqus